MAINTENANCE
52
ob00686
Checking Power Trim Fluid
1. Tilt outboard to the full up position and engage the tilt support lever.
ob00687
2. Remove fill cap and check fluid level. The fluid level should be even with the bottom of the fill hole. Add
Quicksilver or Mercury Precision Lubricants Power Trim & Steering Fluid. If not available, use automotive
(ATF) automatic transmission fluid.
ob00688
Changing Engine Oil
ENGINE OIL CAPACITY
Engine oil capacity is approximately 5 liters (5.3 quarts).
OIL CHANGING PROCEDURE
1. Tilt the outboard up to the trailer position.
2. Turn the steering on the outboard so that the drain hole is facing downward. Remove drain plug and drain
engine oil into an appropriate container. Lubricate the seal on the drain plug with oil and reinstall.
To Next Page
Loading...
