Mercury 80 Owner's Manual

OUTBOARD INSTALLATION
64
a
b
20854
a - Lifting base b - Lifting eye
Flywheel Puller/Lifting Ring 91-895343T02
14869
Removes flywheel from engine. Used
for lifting powerhead/engine.
Steering Cable - Starboard Side Routed Cable
1. Lubricate O-ring seal and entire cable end.
3724
95
Tube Ref No. Description Where Used Part No.
95
2-4-C Marine Lubricant
with Teflon
O-ring seal and entire
cable end
92-802859Q1
2. Insert steering cable into tilt tube.

Mercury 80 Specifications

General

Steering	Remote
Shaft Length	20 in (508 mm)
Gear Ratio	2.07:1
Horsepower	80 hp
Full Throttle RPM Range	5000-6000 RPM
Bore x Stroke	3.15 x 3.15 in (80 x 80 mm)