MAINTENANCE
eng 93
EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and
engine specifications directly related to emissions, is placed on
the engine at time of manufacture.
a - Piston displacement
b - Maximum emission output for the engine family
c - Percent of fuel line permeation
d - Timing specification
e - Family number
f - Engine family description
g - Engine power ‑ kilowatts
h - Idle speed
OWNER RESPONSIBILITY
The owner/operator is required to have routine engine
maintenance performed to maintain emission levels within
prescribed certification standards.
The owner/operator is not to modify the engine in any manner
that would alter the horsepower or allow emission levels to
exceed their predetermined factory specifications.
Inspection and Maintenance Schedule
BEFORE EACH USE
• Check engine oil level. See Fuel and Oil ‑ Checking and
Adding Engine Oil.
• Check that lanyard stop switch stops the engine.
2008
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
THIS ENGINE CONFORMS TO 2010 CALIFORNIA AND U.S. EPA EMISSION
REGULATIONS FOR SPARK IGNITION MARINE ENGINES. REFER TO OWNER’S
MANUAL FOR REQUIRED MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
PLEASE PERFORM THE ENGINE MAINTENANCE CORRECTLY.
FAMILY :
MERCURY MARINE
EMISSION CONTROL INFORMATION
a
DISPLACEMENT :
FEL : HC+NOx=
LOW-PERM/HIGH-PERM :
TIMING :
IDLE SPEED (IN GEAR) :
MAXIMUM POWER :
HP :
2008
b
c
d
e
f
g
h
43058
CO=
To Next Page
Loading...
Need help?
General
