Mercury 9.9 User Manual

TRANSPORTING
eng 51
Carrying, Storing, and Transporting Your Outboard
when Removed from Boat
IMPORTANT: Ensure the proper procedures are followed for
transportation and storage of the outboard to avoid the possibility
of oil leaks.
1. With the outboard still in the water, disconnect the remote
fuel line and run engine until it stops. This will drain fuel from
the carburetor. Install the protector cap over the fuel
connector.
a - Protector cap
2. Remove outboard and hold it upright until the water is
drained out. Keep the outboard in an upright position when
carrying.
27010
a
28530

Mercury 9.9 Specifications

General

Cylinders	2
Fuel Tank	External
Full Throttle RPM Range	5000 - 6000 RPM
Fuel Induction System	Carbureted
Alternator Amp	6 amp
Horsepower	9.9 hp
Starting	Manual
Shaft Length	15 in, 20 in
Steering	Tiller