Mercury 9.9 - Oil Filling; Lubrication Points

MAINTENANCE
108 eng
5. Lubricate the seal on the drain plug with oil and reinstall.
22921
4537
OIL FILLING
IMPORTANT: Do not overfill. Be sure that the outboard is upright
(not tilted) when checking oil.
1. Remove the oil fill cap and refill with 800 ml (27.0 fl. oz.) of
oil. Reinstall the oil fill cap.
28617
2. Idle engine for five minutes and check for leaks. Stop engine
and check oil level on dipstick. Add oil if necessary.
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision
Lubricants 2‑4‑C with PTFE or Special Lubricant 101.