Mercury 9.9 User Manual

ENGINE INSTALLATION
eng 129
Description Nm lb. in. lb. ft.
Transom bracket mounting bolts 13.5 10
Remote Control Installation
STEERING CABLE
1. Lubricate the entire cable end with Mercury Precision or
Quicksilver 2‑4‑C with PTFE.
28722
Tube
Ref No.
Description Where Used Part No.
95
2-4-C Marine
Lubricant with
PTFE
Steering cable end 92-802859A 1
2. Insert the steering cable into the tilt tube.
28723
3. Tighten the steering cable nut to the specified torque.
a - Steering cable nut
Description Nm lb. in. lb. ft.
Steering cable nut 47.5 35
a
28724

Mercury 9.9 Specifications

General

Cylinders	2
Fuel Tank	External
Full Throttle RPM Range	5000 - 6000 RPM
Fuel Induction System	Carbureted
Alternator Amp	6 amp
Horsepower	9.9 hp
Starting	Manual
Shaft Length	15 in, 20 in
Steering	Tiller