94
CD814
Power Package Layup (Continued)
71217
10
8
77143
CD815
8 Remove drain plug from lower part of intercooler.
9 Repeatedly clean out drain holes using a stiff piece of wire. Do this until entire system is drained.
10Ensure that gear housing water vent and drain holes, speedometer pitot hole and trim tab cavity vent and drain
holes are open and unobstructed.
CAUTION
Avoid water entering boat. Do not unplug seawater inlet hose unless a seacock is present and it is
closed.
11 After seawater section of cooling system has been drained completely, coat threads of drain plugs with
Perfect Seal and reinstall. Tighten securely.
To Next Page
Loading...
Need help?
General