Section 5 - Maintenance
Page 76 90-899883173 DECEMBER 2007
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Throttle cable pivot points &
guide contact surfaces
92‑883725K01
Transmission Linkage
IMPORTANT: The poppet ball must be centered in the detent hole for each F‑N‑R position.
1. Lubricate the detent ball and the holes in the shift lever.
a
5934
In‑Line Transmission
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Detent ball and shift lever
holes
92‑883725K01
2. Lubricate the shift cable pivot points.
a
a
5935
a - Pivot points
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Shift cable pivot points 92‑883725K01