VELVET DRIVE 5000A DOWN ANGLE TRANSMISSION SERVICE MANUAL NUMBER 23
Page 8B-16 90-861326--1 MARCH 1999
Changing Transmission Fluid
Draining Transmission
1. Clean area around drain plug shown.
2. Remove dipstick and then remove drain plug. Drain oil from transmission into a suitable
container.
73252
a
a-Drain Plug
3. Check oil for the following foreign matter:
• Metal Particles - A few small particles are normal. Larger metal chips are an early sign
of transmission failure which may mean transmission should be disassembled and in-
spected for internal damage.
• Rubber Particles - Indication of cooler hose wear. Hoses should be inspected for
cracks or fraying. Replace damaged hoses.
4. Coat drain plug threads with Quicksilver Perfect Seal. Install and torque drain plug to
25 lb. ft. (34 N·m).
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General