Mercury SST120 User Manual

18
GENERAL INFORMATION
Specifications (Torques)
MODEL SST 120/S2000
Cyl. Head Bolts 30 lb-ft (41 Nm) + 90° (1/4 turn) Light Oil
Exhaust
Divider Plate
200 lb-in. (23 Nm)
Lower End Cap 100 lb-in. (11 Nm) 271 Loctite
Upper End Cap 200 lb-in. (23 Nm)
Carb Adaptor to
Reed Hsg.
100 lb-in. (11 Nm)
271 Loctite
Reed Block to
Reed Block Hsg.
100 lb-in. (11 Nm)
271 Loctite
Connecting Rods
30 lb-ft (41 Nm)
271 Loctite
Crankcase Cover
to Block
3/8 in. - 40 lb-ft (54 Nm) Light Oil
5/16 in. - 200 lb-in. (23 Nm) Light Oil
Stator Screws 40 lb-in. (5 Nm) 271 Loctite
Ign. Coil Screws Tighten Securely 271 Loctite
Flywheel Nut 150 lb-ft (203 Nm)
Spark Plugs 20 lb-ft (27 Nm)
Powerhead to
Drive Shaft Hous-
ing
35 lb-ft (47 Nm)
Gear Case to DSH Tighten Securely

Mercury SST120 Specifications

General

Brand	Mercury
Model	SST120
Category	Outboard Motor
Language	English