Section 1 - Getting Started
90-8M0109374 eng JUNE 2016 Page 23
Non‑Mercury Marine Menus
Operators may find themselves out of the recognizable Mercury Marine screens of the VesselView. These menus and options
are referred to as the Navico® side of VesselView. Mercury Marine does not support these components of the unit. For
additional information on this side of the VesselView, please contact Navico®. To get back to the navigation screens of the
Mercury Marine side of the unit, press the Home button, and the Mercury Engine tile will appear. Select this tile to return to the
VesselView screen.
The System Controls window can be brought up by swiping from the top of the unit onto the screen. This will allow the user to;
utilize the Mercury Settings menu, place the unit in Standby mode, adjust the brightness of the screen, run in night mode,
engage the Touch lock feature, customize wireless connectivity, and activate the instrument bar on the right‑hand side of the
display.
To Next Page
Loading...
Need help?
General
