Chapter 5 – AP Mode
Figure 5-2
The Soft AP icon should then appear beside Advanced icon in the utility.
Figure 5-3
¾ Soft AP mode: Select to enable or disable the function.
¾ Internet Connecting Share(ICS): Specify a connection through which devices
connected to your AP can access the Internet.
¾ SSID: Enter the name for your soft AP (for example, Jone) so that others can know which
AP is yours when trying to connect to it. The default name (SSID) is “SoftAP”.
¾ Security Type: The security type here is set to be WPA2-PSK which is based on 802.11i
and uses Advanced Encryption Standard instead of TKIP. It was designed to improve the
150Mbps Wireless N Nano USB Adapter 30
To Next Page
Loading...
