Chapter 5 – AP Mode
security features of WEP. WPA2-PSK uses a passphrase or key to authenticate your
wireless connection. You needn’t make any configuration here.
¾ Encryption Type: The encryption type here is set to be AES.
¾ Security Key: Enter the Key in the field to make your AP security enabled. It is
recommended that you specify another key instead of the default key 12345678. Only by
entering the corresponding key can other computers establish a successful connection
with your AP.
¾ IP Address: Here displays the IP address of the SoftAP.
150Mbps Wireless N Nano USB Adapter 31
To Next Page
Loading...
