Achieving the Perfect Hand Wash
5
The CleanTech
®
EVO system provides a no-touch, completely automatic hand
wash by sequentially delivering handwashing solution and water in a
stimulating spray to the hands or gloves from fingertips to wrist. The system
uses the UPX - UltraPure hand hygiene solution and water to remove more than
99.9% of pathogens from hands or gloves. The system can also remove
particles, allergens, sodium's and other contaminants.
The standard system configuration is 12 seconds which consists of a PRIME
Cycle, WASH cycle, and Final RINSE to thoroughly clean and sanitize the hand in
the simplest way. A helical configuration of jet nozzles located within the two
rotating cylinders is used to spray the mixture of solutions and pressurized
water onto the hands followed by a potable water rinse.
To minimize cross-contamination, an infrared photo optical sensor positioned directly above the cylinders automatically senses the presence of your
hands when they enter the cylinders. This activates the wash cycle; it will not be necessary to touch any part of the system; simply insert your hands into
the cylinders. One complete hand wash cycle will automatically dispense the appropriate volume of hygiene solution followed by a potable water rinse.
The minimum time interval between user cycles is approximately 2 seconds.
Designed together to create the perfect handwash
Solutions – importance – the mechanical engineering combined with chemistry to create the ultimate hand wash
The CleanTech
®
EVO system utilizes proprietary solutions cartridges for both the UP
X
– UltraPure Hand Hygiene solution and the
optional SelfClean
X
System Cleaning Hygiene Solution. These solutions have both been specifically engineered to work with the CleanTech
®
system for
optimum performance. The solution delivery system is designed to give each user the exact same amount needed for CleanTech
®
to remove more than 99.9%
of pathogens during the automated hand wash.
Watch how EVO works
To Next Page
Loading...
