6
Helpful Pointers for Trouble Free Operation
• Avoid touching or resting your hands and forearms on the cylinders themselves. If you apply pressure to the cylinder walls, the cylinders have been designed
to stop spinning and will restart once you have stopped impeding their rotation.
• Occasionally you may encounter a condition where you have placed your hands into the cylinders, but nothing happens. This condition generally occurs
when the next cycle is requested before the previous wash cycle is completed or the hands are not in the centers of the cylinders and blocking the photoeye
sensors. To reset the cycle, simply remove your hands, wait for 3 seconds and reinsert your hands into the center of the cylinders.
• During periods of infrequent use, the water temperature may cool. This will have no effect on the quality of the hygiene event and the wash you will receive.
The UltraPure Hand Hygiene Solution is designed to work with CleanTech
®
to properly remove pathogens through a broad range of temperatures. The time it
takes for the warm water to return to the station will depend on the distance of the hot water source from the station. In extreme cases or in cold
environments, it may be beneficial to have a booster water heater near the system.
• CleanTech
®
EVO Stations have been designed to be left in the power "on" mode over normal periods of operation. During extended periods of time (3
months or longer) when the system will not be used, we recommend contacting Meritech Support at support@meritech.com or 800-932-7707 for assistance
in prepping the station for this unused period of time.
To Next Page
Loading...
