XBW Sole Only • 15
Walking Grate Height Adjustment - continued
• 3 stainless washers below black spacer is: .325” Bristle above grate per the picture above.
• 2 stainless washers below black spacer is: .425” Bristle above grate per the picture above.
• 1 stainless washer below black spacer is: .525 Bristle above grate per the picture above.
• 0 washers below black spacer is: .625 Bristle above grate per the picture above.
Caution make certain that all 6 of the grate hold down wings nuts are in place and tightened before system
is used.
System Cleaning
Depending on the environment that the system is installed, the type or frequency of use and or the types of
soils being removed from the boots will determine the frequency and the type of cleaning the system should
go through. The cleaning process should also be documented within your HAACAP or SSOP document or per
your company’s internal procedures.
Please contact Meritech customer service to receive a copy of the Meritech cleaning procedure and
recommendations.
CAUTION: Even though the electronics is contained in NEMA 4x enclosure, we DO NOT
recommend directly hosing down the electronics module of this system.
CAUTION: This equipment contains moving parts and starts automatically. DO NOT USE
with loose clothing that can be caught in the system. This includes, but is not limited to, long
smocks, frock ties, shoelaces and street shoes.
To Next Page
Loading...