MERLYN 6 Series Installation Instructions

6
Step 8b.
Measure from the top of the support bar ferrule
V6S6SW05 to the ceiling and . Cut the
vertical support bar V1120 to this length.
subtract 1cm
NOTE: Do not cut end with internal thread on
V1120.
Step 9b.
Screw the support bar V1120 to the ferrule V6S6SW05 with the ceiling mount
V6S6SW07A loose in the top. Ensure the support bar is plumb vertical and mark the
position for the mount on the ceiling. Remove the bar and fix the mount to the ceiling
using plugs and screws
.
V8125 V4115. THE CEILING MOUNT MUST BE SECURED
TO A JOIST OR OTHER SOLID COMPONENT
Step 10b.
Slide the cover sleeve over
the bar and insert the bar into the
ceiling mount V6S6SW07A. Screw
the bar down onto the support ferrule
V6S6SW05. Tighten the grub screws
in the ceiling mount.
V8118
Step 12b.
Screw the cover sleeve up onto
the ceiling mount over the secured
support bar.
V8118
V6S6SW07A
V4115
V8125
V8118
9b
12b
8b
MEASURE
OPTION 2- VERTICALFITTING TOP RAIL
V1120
10b
V8124
11b
Step 11b.
Tighten the screw V6M5
V8124.
X5 using
TIGHTEN
V6M5X5

MERLYN 6 Series Specifications

General

Glass Thickness	6 mm
Style	Modern
Warranty	Lifetime
Finish	Chrome
Type	Shower Enclosure
Material	Glass, Aluminium
Installation Type	Wall Mounted