MERLYN 6 Series Installation Instructions

SEALING AND TROUBLE SHOOTING
7
Step 13.
Step 14.
Use a quality silicone sealant and
applicator gun to seal the finished
door.
Seal top to bottom on the
between the wall profile and the
wall. Note: do not apply sealant on
the inside of the tray / floor.
Seal only along bottom on the
between it and the tray /
floor and approx 50mm up between
the wall profile and the wall.
Fix the top cover cap & V6MLN05
V6LP8076.
Seal at
vertical joints on bottom of
frame on outside only.
SEALING INSIDE
INSIDE
SEALING OUTSIDE
OUTSIDE
24 HRS
TROUBLE SHOOTING GUIDE
1. Is the tray / floor level where the shower wall is located? ( )
2. Is the shower wall sealed correctly to the floor and wall in the correct location ( )
3. Is the wall profile plumb? ( )
4. Top rail will not reach the back wall. Ensure that the back wall is not leaning back. (away
from the tray at the top) The distance from the
be maximum 950mm ( )
see page 3
see step 14
see step 1
see step 1
inside of the wall profile to the back wall
should
50mm
13
V6LP8076L/R
V6MLN05

MERLYN 6 Series Specifications

General

Glass Thickness	6 mm
Style	Modern
Warranty	Lifetime
Finish	Chrome
Type	Shower Enclosure
Material	Glass, Aluminium
Installation Type	Wall Mounted