19
CLEANING: 1
For the oven to operate at peak efciency, the cavity, door and air lters and grease lter must
be kept clean.
Adailycleaningroutinewillensurethatyoucomplywiththerequiredhygienestandardsandwillhelp
tomaintainandprolongtheefciencyofyouroven.
FollowtheSAFETYINSTRUCTIONSatthebeginningofthismanual.
Faultsarisingfromneglector
misuseincludingusewithoutclean
ltersinplacearenotcovered
by the guarantee. Service visits
as a result of such faults will be
chargeable.
Hot surface
Hazard
WARNING: DO NOT use caustic cleaners on any part of the oven or oven
cavity as it will cause permanent damage to the Catalytic Convertors
DO NOT use the oven without clean air lters and cavity grease lter in place
1.
Spray Merrychef Oven
Protector onto the
sponge
START UP: OVEN COATING PROCEDURE ( clean oven )
4.
Switch on the oven and
pre–heat. When the oven
has reached operating
temperatureitwilltake
about30minstocurethe
Oven Protector.
3.
Spread Oven Protector
lightly onto the internal
surface of the oven door
2.
Spread Oven Protector
lightly onto all internal
surfaces of the oven
Note: oven protector turns light brown when cured
• ALWAYS switch off at the electrical supply before
cleaning
• Complete COOL DOWN procedure and allow the
oven and accessories to cool before commencing
cleaning
• As required wipe out spillages with disposable
paper wipes
• NEVER use steel wool, knives or harsh abrasives
on any part of the oven
As with all electrical appliances, it is wise to have the
electrical connections inspected periodically.