Merrychef conneX 12 - How to Cook

8 Cooking procedures
Back to contents >
Merrychef conneX
®
Installation and User Manual
43
1.
Switch on the microwave combination oven.
2.
Wait until the software is ready for use.
NOTE:
The ‘Home’ screen visible on the left is only displayed in Full Serve
Mode.
1.
2.
Perform the necessary cleaning tasks as specified in the cleaning
schedule.
Switch off the microwave combination oven.
3.
Leave the appliance door ajar to let moisture escape.
NOTE:
Switch off the mains power on site before prolonged breaks in use.
Switching on the microwave combination oven
Switching off the microwave combination oven at the end of the day
8.1.3 How to cook
For your safety when using the microwave combination oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings specified in 'Working
safely with the appliance' section 8, and follow the instructions given there.
Requirements
▪ You are sufficiently familiar with using the software to be able to select saved cooking profiles or enter new cooking
profiles that are suitable for the food you wish to cook, and to run these profiles.
▪ The microwave combination oven and accessories and fittings used have been cleaned properly.
▪ There are no foreign objects in the cavity.
▪ The air filter is fitted in place on the oven front underneath the appliance door.