Installation and Operating original instructions.
Part Number 32Z3797 GB
Issue 1
17
OPERATION & CONTROLS
1 2 3
5 64
1 2 3
4 5
CHANGING THE OVEN TEMPERATURE
4. Select the required cooking program to start
cooking.
For example, ‘1 BURGER’.
5. The program either starts immediately
displaying a countdown timer, or an instruction is
displayed rst; follow the stage instruction then
select OK to start cooking. If the oven door is not
opened within 30 seconds a warning message
appears.
6. The cooking timer counts down to zero and
makes a sound to indicate an operator action is
required at the end of a cooking stage or the end
of a cooking program.
Once the cooking program has nished, opening
the oven door to remove the food returns the
display to the ‘COOKBOOK’ screen.
Note; opening the oven door during cooking stops
the cooking program and displays a warning. Closing
the door allows the user to continue or cancel the
cooking program.
To check the oven temperature when cooking, lightly
tap the temperature displayed, the oven cavity
temperature is shown with an asterisk.
VIEWING & EDITING PROGRAMS
1. Take note of the temperature required for the
recipe and select OK.
2. Select the temperature symbol.
3. An asterisk next to the number indicates the
present oven temperature, select the required
oven temperature for the recipe. Once the oven
is at the required temperature continue from
selecting the ‘COOKBOOK’ in step 1.
1. Select ‘COOKBOOK’ from the main menu screen.
2. Select the ALL MENUS symbol.
3. Select ‘EDIT COOKBOOK’.
4. Use the up/down scroll arrows on the right
side of the screen to nd the cooking program,
for example 1 BURGER and select the view/edit
cooking program symbol.
5. View or adjust the program as required, see
Development mode for details.
To Next Page
Loading...
Need help?
General
