Meru Networks AP150 User Manual

46 Meru Access Point Installation Guide © 2010 Meru Networks, Inc.
Installing AP320i
6. Connect one end of the Ethernet cable to the switch and the other end to the AP320i Ethernet port.
Figure 21: AP320i Ethernet Port on the Right
7. If you are not using a PoE device, connect an external power supply to the power connector and
plug it into the wall.
8. Align the tabs on the wall bracket with the tabs on the ceiling bracket and then rotate the AP320i
clockwise to secure it to the wall. See Figure 22 below.
Figure 22: Mount AP320i on a Wall
Caution! Be sure to connect the Ethernet cable to the Ethernet port. The cable can
mistakenly be plugged into the Console port; if you do this. the AP won’t power up.
g00240
LAN 5V DCCON
console Ethernet
Wall bracket
(mounted
on wall)
Mounting
bracket
(attached)
AP300i
Tabs
Align tabs on Wall bracket
with tabs on the Mounting
bracket.
Twist to secure the
AP300i to the wall.
00237

Meru Networks AP150 Specifications

General

Brand	Meru Networks
Model	AP150
Category	Wireless Access Point
Language	English