Need help?Do you have a question about the Metabo HC 260 C and is the answer not in the manual?
General| Planing Width | 260 mm |
|---|---|
| Max. Planing Depth | 3 mm |
| Max. Thicknessing Height | 160 mm |
| Feed Rate | 5 m/min |
| Motor Power | 2.2 kW |
| Chip removal thickness planing | 3 mm |
| Chip removal thickness thicknessing | 3 mm |
| Table thicknessing table | 400 x 260 mm |
| Passage height/width | 160 mm / 260 mm |
| Planing shaft diameter | 63 mm |
| Number of blades | 2 |
| Planing table | 260 mm |
| Planing shaft speed | 6, 500 rpm |
To Previous Page
