MetLogix Mx200 - Tolerance

37
Keypress Beep
Length
Configures the beep length of the Mx200 beeper. Set to 50, 100, 150, or 200
milliseconds using the appropriate softkey.
Long keypress beep
length
Configures the long press beep length of the Mx200 beeper. Set to 50, 100,
150, or 200 milliseconds using the appropriate softkey.
Invalid keypress
beep length
Configures the invalid press beep length of the Mx200 beeper. Set to 50, 100,
150, or 200 milliseconds using the appropriate softkey.
4.9 Tolerances
The “Tolerances” settings screen contains setup parameter for configuring the tolerance capability in
the Mx 200.
Use ++/-- Tolerance Mode
The Mx200 supports the alternate tolerance mode, ++/-- tolerancing. To enable the ++/-- mode press
the “Yes” softkey. Tolerances will now be specified as ++ or --.