Kit Assembly 99-5716
7
DIN head unit provision
1. Slide the DIN cage into the Integrated
Mounting Kit and secure by bending the
metal locking tabs down. (Figure A)
2. Slide the aftermarket head unit into the
cage and secure. (Figure A)
3. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly. (Figure B)
(Figure A)
(Figure B)
To Next Page
Loading...
