INSTALLATION INSTRUCTIONS FOR PART 99-6510
APPLICATIONS
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• Double DIN radio provision
• Stacked ISO unit provision
• Designed for vehicles with factory navigation radios
• A) Radio housing • B) ISO brackets • C) ISO trim plate • D) Double DIN brackets • E) Pocket
• F) Double DIN trim plate
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• XSVI-6502-NAV - Chrysler CAN R.A.P.
interface 2004-up
• CHTO-01 - Chrysler CAN amp interface 2004-up
Antenna Adapter:
• 40-CR10 - Chrysler antenna adapter 2004-up
• Flat blade screwdriver • Panel Removal Tool
• Phillips Screwdriver • Socket Wrench • Cutting tool
TOOLS REQUIRED
Chrysler/Dodge/Jeep 2005-2008
99-6510
See application list inside
B
CA
F
D E
To Next Page
Need help?
General
