CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.
®
MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 8/10/18 INST99-6502B
INSTALLATION INSTRUCTIONS
99-6520B
U.S. Patent # D755,778 D768,126
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Included interface retains factory screen
• Painted matte black to match factory finish
Note:
Does not retain sound from “Driver Convenience Group”
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) A/C button housing • D) Pocket • E) Console bracket • F) (6) #8 x 3/8” Phillips pan-head screws
• G) (2) Panel clips • H) Climate extension harness (not shown) • I) Axxess interface and harness (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
– ISO DIN radio provision with pocket .................5
– ISO DDIN radio provision ....................................5
Axxess interface installation .............................6-11
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Interface and harnesses included
Antenna Adapter: 40-EU10 (sold separately)
Steering Wheel Control Interface: ASWC-1
(sold separately)
Dodge Journey 2011-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.
A
F G
B C D E
To Next Page
Need help?
General
