Metra Electronics 99-7892

To Next Page

APPLICATIONS

CAR PAGE

ACURA

CL 1997-99................................................................. 1

Integra 1990-93.......................................................... 2

Integra 1994-00.......................................................... 3

Legend 1990................................................................4

Legend 1991-96.......................................................... 5

TL 1996-98..................................................................6

Vigor 1992-94............................................................. 7

HONDA

Accord 1990-93........................................................... 8

Accord 1994-97........................................................... 9

Odyssey 1995-98.........................................................10

ISUZU

Oasis 1996-99............................................................. 10

99-7892

INSTALLATION

INSTRUCTIONS

KIT COMPONENTS

TOOLS REQUIRED

Cutting tool

Socket wrench

Phillips screwdriver

KIT FEATURES

Shaft, DIN and

ISO-DIN unit

provisions

Pocket

provisions

ISO-DIN

Brackets

Faceplate

Rear Support

Bracket

(2) Phillips

Screws

ALL VEHICLES

2-SHAFT HEAD UNITS: Snap the Faceplate into the Radio Housing. Slide the aftermarket

head unit into the kit and secure with shaft nuts. (see Fig. A)

DIN HEAD UNITS: Slide the DIN cage into the kit and secure by bending the metal locking tabs

down. Slide the aftermarket head unit into the cage until secure. (see Fig. B)

ISO-DIN HEAD UNITS: Slide the ISO-DIN Brackets onto the sides of the Rear Support

Bracket. Cut and remove the shaft supports from the Faceplate and snap into the Radio

Housing. Slide the aftermarket head unit into the Housing, align the holes in the unit with the

holes in the ISO-DIN Brackets and mount with the screws supplied with the unit. (see Fig. C)

Fig. A

Fig. B

5 6

Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adaptor and making

connections as shown. (Isolate and

individually tape off the ends of any

unused wires to prevent electrical short

circuit).

ACCORD 1990-93, INTEGRA, ODYSSEY,

OASIS: Re-connect the battery terminal and test

the unit for proper operation. Snap the head

unit/kit assembly into the sub-dash.

LEGEND, TL, VIGOR: Re-connect the battery

terminal and test the unit for proper operation.

Snap the head unit/kit assembly into the factory

trim bezel. Mount the bezel to the dash with those

screws previously removed in step #1. (see Fig. A)

ACCORD 1994-97, CL: Re-connect the battery

terminal and test the unit for proper operation.

Slide the head unit/kit assembly into the sub-dash

and mount the Rear Support Bracket to the rear

support provision with (2) hex-head bolts

previously removed. (see Fig. B)

A) Strip wire ends back ½"

B) Twist ends together

C) Solder

D) Tape

Fig. B

Fig. A

Radio Housing

Fig. C

1-800-221-0932 www.metraonline.com

rev. 250701

Need help?

Do you have a question about the Metra Electronics 99-7892 and is the answer not in the manual?

Summary

ALL VEHICLES Installation

2-SHAFT HEAD UNITS Installation

Instructions for installing 2-shaft aftermarket head units into the kit.

DIN HEAD UNITS Installation

Instructions for installing DIN aftermarket head units into the kit.

ISO-DIN HEAD UNITS Installation

Instructions for installing ISO-DIN aftermarket head units into the kit.

Vehicle Specific Installation Guides

ACURA CL 1997-99 Installation

Step-by-step instructions for installing the kit in an Acura CL (1997-1999).

HONDA Odyssey 1995-98; ISUZU Oasis 1996-99 Installation

Instructions for installing the kit in Honda Odyssey (1995-1998) and Isuzu Oasis (1996-1999).

HONDA Accord 1994-97 Installation

Step-by-step instructions for installing the kit in a Honda Accord (1994-1997).

ACURA Integra 1990-93 Installation

Instructions for installing the kit in an Acura Integra (1990-1993).

ACURA Integra 1994-00 Installation

Step-by-step instructions for installing the kit in an Acura Integra (1994-2000).

HONDA Accord 1990-93 Installation

Instructions for installing the kit in a Honda Accord (1990-1993).

ACURA Vigor 1992-94 Installation

Step-by-step instructions for installing the kit in an Acura Vigor (1992-1994).

ACURA Legend 1990 Installation

Instructions for installing the kit in an Acura Legend (1990).

ACURA Legend 1991-96 Installation

Step-by-step instructions for installing the kit in an Acura Legend (1991-1996).

ACURA TL 1996-98 Installation

Instructions for installing the kit in an Acura TL (1996-1998).