Metra Electronics 99-7877S User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-7877S
99-7877S
APPLICATIONS
Honda Fit 2009-10
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• P
ainted To Match Factory Dash
“S”= SILVER
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
D
E
F
C
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• 70-1729 Honda Harness 2008-up
• 40-HD10 Honda Antenna Adapter 2005-up
TOOLS REQUIRED:

Metra Electronics 99-7877S Specifications

General

Brand	Metra Electronics
Model	99-7877S
Category	Automobile Accessories
Language	English

Summary

Applications

Honda Fit 2009-10 Compatibility

Specifies the vehicle compatibility for the installation kit.

Dash Disassembly

Honda Fit 2009-10 Dash Disassembly Steps

Procedure to remove the factory dash panels and components for the Honda Fit 2009-10.

Kit Preparation

Prepare Radio Housing Panel

Attach hazard switch, airbag light, and A/C vents to the radio housing using factory hardware.

Kit Assembly

DIN Mount Radio with Pocket Installation

Install a single DIN radio with pocket into the radio housing and reassemble dash.

ISO Mount Radio with Pocket Installation

Install ISO mount radio with pocket using brackets and trim plate, then reassemble dash.

Double DIN or Stacked ISO Radio Installation

Install Double DIN or stacked ISO radios with brackets and trim plate, then reassemble dash.