Metra Electronics 99-7877S - Kit Preparation; Prepare Radio Housing Panel

2
99-7877S KIT PREPARATION
KIT PREPARATION
1
Secure the a/c vents to the radio
housing using the factory hardware.
( Figure B)
Secure the hazard switch into the
radio housing panel using the factory
hardware. ( Figure A)
3
Attach the (7) retaining clips to the
radio housing panel in the same
location as removed from the factory
radio panel.
4
Secure the air bag light into the radio
housing panel using the factory
hardware. (
Figure A)
2
Continue to kit assembly.
A
B