￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
800 Dosino
￭￭￭￭￭￭￭￭
7
3 Installation
3.1 Setting up the instrument
3.1.1 Packaging
The instrument is supplied in protective packaging together with the sepa-
rately packed accessories. Keep this packaging, as only this ensures safe
transportation of the instrument.
3.1.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.1.3 Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation, free of vibrations, protected from corrosive atmosphere, and
contamination by chemicals.
The instrument should be protected against excessive temperature fluctua-
tions and direct sunlight.
3.2 Setting up the Dosino and the dosing unit
3.2.1 Dosino with Titrando
When the 800 Dosino is used together with an 807 Dosing Unit as a
titrating buret with a Titrando, two bottles (with titrant or auxiliary
reagents) can be placed on the Titrando with dosing unit and Dosino
mounted (see Figure 2, page 8). Additional titrants or auxiliary reagents
can be given stable storage in practical bottle holders (see Figure 3, page
8).
To Next Page
Loading...
Need help?
General
