3.3 Tubing and capillary connections
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6
￭￭￭￭￭￭￭￭
917 Coulometer
Protection against electrostatic charges
WARNING
Electronic components are sensitive to electrostatic charges and can be
destroyed by discharges.
Do not fail to pull the power supply cable out of the power socket
before you set up or disconnect electrical plug connections at the rear
of the instrument.
3.3 Tubing and capillary connections
CAUTION
Leaks in tubing and capillary connections are a safety risk. Tighten all
connections well by hand. Avoid applying excessive force to tubing
connections. Damaged tubing ends lead to leakage. Appropriate tools
can be used to loosen connections.
Check the connections regularly for leakage. If the instrument is used
mainly in unattended operation, then weekly inspections are manda-
tory.
3.4 Flammable solvents and chemicals
WARNING
All relevant safety measures are to be observed when working with
flammable solvents and chemicals.
￭ Set up the instrument in a well-ventilated location (e.g. fume cup-
board).
￭ Keep all sources of flame far from the workplace.
￭ Clean up spilled liquids and solids immediately.
￭ Follow the safety instructions of the chemical manufacturer.
To Next Page
Loading...
Need help?
General
