Metrohm AUTOLAB MULTI M101 - Add the M101 Modules to the Existing Multi Autolab Cabinet

40 pages

To Next Page

To Previous Page

Insert a new module for the Multi Autolab Cabinet

Figure 31 – The new M101 or M204 modules are listed alongside the existing M101 or M204

modules installed in the Multi Autolab Cabinet

5.1.2.1 – Add the M101 modules to the existing Multi Autolab Cabinet

Using the procedure described in Section 5.1.1.2, drag and drop the new M101 or M204

modules into the existing Multi Autolab Cabinet (see Figure 32).

28 | Page