Metrohm AUTOLAB MULTI M101 - 1 Introduction; 2 Overview of Compatible Modules

Insert a new module for the Multi Autolab Cabinet
1
– Introduction
The Multi Autolab instruments consist of a Multi Autolab Cabinet, or MAC, with a total of
12 module bays. There are two types of Multi Autolab Cabinets:
• The Multi Autolab/M101, identified with a serial number beginning with
MAC8
.
This type of cabinet is designed to accommodate up to 12 M101
Potentiostat/Galvanostat modules.
• The Multi Autolab/204 identified with a serial number beginning with
MAC9
. This
type of cabinet is designed to accommodate up to 12 M204
Potentiostat/Galvanostat modules.
2
– Overview of compatible modules
Module
Items
Quantity
Required software
BA
Module label BA
BNC-Coax –Banana cable
Alligator clip
Analog bus cable
1
1
1
1
Nova 1.7 or higher
FRA32M
Module label FRA32M
Analog bus cable
1
1
Nova 1.8 or higher
MUX
Module label MUX
Digital MUX cable
1
1
Nova 1.7 or higher
pX1000
Module label pX1000
Cover for front connector
Lemo to banana cable (V+, V-)
Analog bus cable
1
1
2
1
Nova 1.7 or higher
EQCM
Module label EQCM
Oscillator box
DB9 Oscillator connection cable
Crystal 6 MHz Au/TiO
2
polished
EQCM cell
Au counter electrode
Reference electrode
Ag/AgCl, 3M KCl
Driving force adjustment tool
Spare O-ring Reference electrode
Spare O-ring Counter electrode
Spare O-ring Viton Crystal
Spare O-ring Cell cover
2.5 mm hex driver
Spare EQCM cell screw
1
1
1
2
1
1
1
1
1
1
4
1
1
3
Nova 1.7 or higher
Table 1 – Module compatibility table
Warning
It is not possible to install M101 modules in a Multi Autolab/M204 cabinet. It is not
possible to install M204 modules in a Multi Autolab/M101 cabinet.
3 | Page