D - Deletion of a transponder
Deleting out-of-date transponders speed up the Auto Scan.
• Go to MENU / Installation / Manual Scan
• On the line Satellite, select with 34 arrow keys the satellite from which you want to delete
a TP.
• On the line TP Freq, press OK to access to the list of transponders (TP).
• With the 56arrows, select the TP to delete and press OK
• Press on the green key to display the TP Edit window
• Select Del One with the 6 key and press OK. Press OK again for confirmation.
Press EXIT to exit all menus.
E - Search of a particular channel (PID entry)
In some (rare) cases, it may happen that a manual scan or Auto scan doesn’t find a channel. It is
so possible to add a channel by entering it’s PID’s.
• Go to MENU / Installation / Manual Scan
• On the line Satellite, select with 34 arrow keys the satellite from which you want to delete
a TP.
• Press on the yellow key to display the Add One Channel window
• Enter the frenquency, the symbol rate, and all 3 necessary PID’s (Video, Audio and PCR).
Note, if you don’t know the PCR PID, use the V-PID instead for a TV channel, and the A-PID
instead for a radio channel.
• Press on the red key to store, the channel is created at the end of the channel list. You will
have to rename it as explained after.
To Next Page
Loading...
