Metso LCP9H Series Installation, Maintenance And Operating Instruction

11
10 EC DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY
Manufacturer:
Metso Automation Oy
01301 Vantaa
Finland
Product:
Local Control Panel LCP9H-series
Approvals:
As the products within our sole responsibility of design and manufacture may be used as parts or components in machinery and are not alone
performing functions as described in Article 6(2) in the Machinery Directive (2006/42/EC), we declare that our product(s) to which this Declaration of
Conformity relates must NOT be put into service until the relevant machinery into which it is to be incorporated has been declared in conformity with
the provisions of the Machinery Directive.
The product above is manufactured in compliance with the applicable European directives and technical specifications/standards.
Protection from e.g. static electricity caused by the process or connected equipment must be considered by the user ( EN 60079-14 §6 ).
The product do not possess any residual risk according to hazard analyses made under the applicable directives providing that the procedures
stated by the Installation, Operation and Maintenance manual are followed and the product is used under conditions mentioned in the technical
specifications.
Vantaa 11th February 2015
Ralf Liljestrand, Quality Manager
Authorized person of the manufacturer within the European Community
Applicable directives:
EMC 2004/108/EC Electrical
ATEX 94/9/EC Approved and Ex marked types
ATEX Notified Bodies for EC Type Examination Certificate:
SIRA (Notified body number 0518)
Sira Certification Service
Rake Lane, Eccleston,
Chester, CH4 9JN
England
VTT (Notified body number 0537)
VTT, Expert Services
Otakaari 7B, Espoo
P.O.Box 1000, FI-02044 VTT
Finland
ATEX Notified Body for Quality Assurance:
ISO 9001:2008 Certificate No: 73538-2010-AQ-FIN-FINAS
ATEX 94/9/EC Annex IV Certificate No: DNV-2006-OSL-ATEX-0260Q
Det Norske Veritas AS (Notified body number 0575)
Veritasveien 1
1322 Høvik, Oslo
Norway
Type
Approval
EC Type examination Certificate
LCP9H
LCP9HW
(EMC 2004/108/EC) EN 61000-6-2 (2005),
EN 61000-6-4 (2007)
NEMKO 135608
LCP9HE
LCP9HEW
(EMC 2004/108/EC) EN 61000-6-2 (2005),
EN 61000-6-4 (2007)
NEMKO Attestation 164606S
LCP9H
LCP9HW
ATEX II 2G Ex ia IIC T6...T4 Gb
ATEX II 3G Ex ic IIC T6...T4 Gc
VTT 09 ATEX 047X, Issue 4
EN 60079-0: 2012, EN 60079-11: 2012
VTT 11 ATEX 048X, Issue 4
EN 60079-0: 2012, EN 60079-11: 2012
LCP9HE
LCP9HEW
ATEX 2 IIG Ex d IIB+H2 T6 Gb
ATEX 2 IID Ex tb IIIC T85°C Db IP65
Ta -20° to +55 °C
SIRA 11 ATEX 1170, Issue 1
EN 60079-0: 2009, EN 60079-1: 2007,
EN 60079-31: 2009

Metso LCP9H Series Specifications

General

Brand	Metso
Model	LCP9H Series
Category	Control Panel
Language	English