CHAPTER 1: INTRODUCTION
6
The HD-1’s transducers include a low-frequency 8-inch
cone driver and a high-frequency 1-inch soft dome tweeter.
The low-frequency driver’s ample magnet and 2-inch voice
coil yield high efficiency with rapid heat dissipation. The
tweeter employs a silk-infused dome that affords smooth
frequency response while minimizing breakup and color-
ation. The proprietary drivers are housed in a vented cabinet
and individually tested for maximum linearity and low distor-
tion.
OBTAINING SERVICE
The HD-1 monitor is protected by Meyer Sound’s Limited
3-Year Warranty. For complete information regarding terms
and conditions, refer to the printed warranty statement
packed with the system.
To obtain service:
1. Contact your Meyer Sound dealer or contact Meyer
Sound Customer Service.
2. If you are calling Meyer Sound, have the HD-1 serial
number handy and be prepared to describe the problem
clearly and completely.
3. If the problem cannot be resolved over the phone, you
must return the unit for service. You will be assigned an
RA (Return Authorization) number for job tracking. Refer
to this number on shipping materials and in all corre-
spondence concerning the repair. Shipping charges are
the responsibility of the purchaser.
To Next Page
Loading...
