FIGURE 3-6
To remove the pump, E-57 use a 1/4” Allen socket on
the three bolts. E-46 and E-47 use a 1/2" hex socket on
the three locknuts. The studs usually unscrew with the
nuts.
FIGURE 3-7
Pump removed from the unit base.
FIGURE 3-8
Remove the “A” Coil using a 3/8" or 1/2" wrench.
FIGURE 3-9
Coil removed from the “A” Cartridge.
DISASSEMBLY - ALL MODELS
-35-
E-46, E-46H & E-47, E-47H
E-46, E-46H & E-47, E-47H
To Next Page
Loading...
