Meyer ELECTRO LIFT E-47 - Disassembly Photos

DISASSEMBLY - ALL MODELS
FIGURE 3-2
To drain oil from the unit, remove the drain plug using a
11/16" wrench.
FIGURE 3-3
Drain Plug removed.
FIGURE 3-4
To replace the motor remove the two cap screws, use a
10mm hex socket on the E-57 and a 3/8" hex socket on
the E-46 and E-47.
FIGURE 3-5
Hold the motor parts together while removing it from the
pump.
-34-
E-46, E-46H & E-47, E-47H
E-46, E-46H & E-47, E-47H