Meyer ELECTRO LIFT E-47 - CROSSOVER RELIEF VALVE Disassembly

FIGURE 3-45
Remove Pressure Spring (55)
FIGURE 3-42
Remove Acorn Nut (61), O-ring (60) using a 15/16” open
end wrench.
FIGURE 3-43
Remove Plug (58) and adjusting Screw (59) using a
3/8” open end wrench.
FIGURE 3-44
Remove Plug (58), Adjusting Screw (59) and Disc (57).
-44-
CROSSOVER RELIEF VALVE DISASSEMBLY