Meyer Formula - User Manual

Questions and Answers

J
Jeremy SmithJul 28, 2025
What to do if spillage is occurring with my Meyer Mixer?
- J
  Jennifer FisherJul 28, 2025
  To address spillage occurring with your Meyer Mixer, consider the following: * Reduce the load size. * Reduce the truck and/or mixer RPM. * Ensure the machine is level. * Reduce the load size until the unit is polished inside. * Adjust hay stops to a less aggressive or neutral position. * Adjust knives to a less aggressive position. * If spillage continues, consider installing optional side extensions or a hay retention ring.
J
Justin ArcherAug 5, 2025
Why is my Meyer Mixer requiring high horsepower?
- T
  Tiffany SnyderAug 5, 2025
  If your Meyer Mixer requires high horsepower, try these solutions: * Reduce the load size. * Adjust hay stops to a less aggressive or neutral position. * Reduce the load size until the unit is polished inside. * Modify the knife type, quantity, setting, or placement. * Shift into 'Low'.
A
Antonio WilliamsAug 12, 2025
How to fix forage that is cut too short in Meyer Mixer?
- E
  Elizabeth WellsAug 13, 2025
  If the forage is being cut too short by your Meyer Mixer, try the following: * Reduce the initial processing time. * Adjust hay stops to a less aggressive or neutral position. * Reduce total loading time. * Reduce the mixer RPM to limit aggressiveness in processing. * Modify the knife type, quantity, setting or placement. * Shift into 'Low'.
C
Cassandra SheppardAug 20, 2025
What to do if there are dead spots in Meyer Mixer?
- L
  Lisa SalazarAug 20, 2025
  If you're experiencing dead spots with your Meyer Mixer, the load size may need to be reduced until the unit is polished inside. Also, the auger scraper may need to be adjusted.

Summary

1.0 IMPORTANT INFORMATION

HOW TO READ YOUR SERIAL NUMBER

Explains the structure and meaning of the mixer's serial number for identification purposes.

2.0 PRE-DELIVERY & DELIVERY CHECK LIST

PRE-DELIVERY CHECK LIST

Points to inspect after setup but before delivery to the customer to ensure correct operation.

DELIVERY CHECK LIST

Information to be passed to the customer at the time of unit delivery.

3.0 INTRODUCTION

IMPORTANT OPERATIONAL ADVICE

Urges users to study the manual to avoid injury and ensure proper operation.

WARRANTY REGISTRATION

Details about the owner's registration form and serial number recording for warranty.

4.0 MANUFACTURERS WARRANTY

Purchased Product Warranty Clarification

Clarifies warranty exclusion for non-Meyer manufactured component parts.

5.0 SAFETY

Safety Alert Symbol

Explains the use of the safety alert symbol for personal safety instructions.

DANGER Signal Word

Defines the signal word DANGER for hazardous situations leading to death/serious injury.

WARNING Signal Word

Defines the signal word WARNING for potentially hazardous situations.

CAUTION Signal Word

Defines the signal word CAUTION for potentially hazardous situations.

5.1 SAFETY PRECAUTIONS

Safety Precautions For Truck Mounted Units

Safety guidelines for truck-mounted units concerning highway safety.

Safety Precautions For Hydraulic System

Safety guidelines related to the hydraulic system, hoses, and fittings.

5.3 SHUTOFF & LOCKOUT POWER

Shutoff & Lockout Power Recommendations

Step-by-step procedure for safely shutting off and locking out power before maintenance.

6.4 START-UP AND SHUT-DOWN

6.4.1 Start-Up Procedure

Step-by-step guide for starting the mixer and truck engine.

6.4.2 Shut-Down Procedure

Step-by-step guide for shutting down the mixer and truck.

6.5 OPERATIONAL CHECKS

Mixer Controls Overview

Explains the location and function of the mixer controls in the truck cab.

7.0 OPERATION

GENERAL OPERATING GUIDELINES

Guidelines for operating the mixer, including run-in period and PTO speed.

7.1.1 Cutout Clutch Function

Explains the function and operation of the cutout clutch for torque limitation.

7.1.2 Material Considerations

Discusses different feed materials and preparation before mixing.

7.2 LOADING

Loading Steps

Step-by-step instructions for loading materials into the mixer.

8.0 MAINTENANCE

8.1 LUBRICATION SCHEDULES

Details lubrication schedules and procedures for various components.

8.1.8 Gearbox Oil Change

Procedures for draining and filling oil in the planetary and 2-speed gearboxes.

8.2 ADJUSTMENTS

Instructions for adjusting auger scraper bar, timing, PTO clutch, knives, and hay stops.

8.5 REPLACEMENT PARTS

Information regarding ordering and replacing worn or damaged parts.

9.0 PARTS

ELECTRICAL COMPONENTS

Lists electrical components, specifically tail lights and their parts.

SCALE SYSTEM

Scale System Components

Exploded view and part numbers for the scale system.

2-SPEED ELECTRICAL SYSTEM (Prior to SN 18 VM0585235, 0700212)

Wiring Diagram

Illustrates the electrical connections for the 2-speed system.

HYDRAULIC POWER PACK

Power Pack Components

Exploded view and part numbers for the hydraulic power pack.

MIXER

Mixer Components

Exploded view of the main mixer assembly and its parts.

10.0 SPECIFICATIONS

Models F585, F700 Specifications

Technical specifications for F585 and F700 mixer models.

Meyer Formula Specifications

General

Brand	Meyer
Model	Formula
Category	Mixer
Language	English