Meyer Formula - Hay Stop Adjustment; Hay Stop Lock Bolt

1-800-325-9103
PB-MIXER-TR-MECH - 41 - www.meyermfg.com
8.2.5 Hay Stop Adjustment
8.2.5.1 Hay Stop Lock Bolt
The hay stop lock bolt (Item 1) prevents the hay stop from rotating
past the intended range of operation. If the hay stop bolt and the
positioning pin (Item 2) are removed, the hay stop could contact the
moving auger and cause damage to the hay stop and auger.
Position Setting Material
A High Light and bulky material (dry grasses)
B Medium High Alfalfa bales and other forages
C Neutral Unrestrained movement of feed
D Medium Low Heavier rations
E Low Aggressive cutting
Do not adjust the hay stops while the mixer is running. Moving feed
inside the mixer can make the hay stop move suddenly causing
injury to the person making the adjustment.
Never operate the mixer without the hay stop lock bolt installed.
1
2
Hay Stop
Position A
Hay Stop
Position B
Hay Stop
Position C
Hay Stop
Position D
Hay Stop
Position E