MFJ-1270C/1274C MANUAL ADVANCED OPERATION
Page 86
The Mail waiting is indicated by the flashing of the STA/MAIL LED on the
front of the MFJ TNC.
The STA/MAIL LED of the MFJ TNC serves two functions. It lights when
unacknowledged packets are pending during a packet connection. If you have
mail waiting, the STA/MAIL LED will flash on and off if the MFJ TNC is not
connected to another packet station.
The "mail-waiting" LED function can be disabled by using the MAILLED
command. MAILLED is defaulted to ON. When MAILLED is OFF or when
MFJ TNC is in a connected state, STA/MAIL LED will not flash.
Mailbox Messages
You have mail!
Upon access to a mailbox, this message will appear if there are messages
addressed to you.
?EH
This message occurs when a command issued is not understood by the mailbox.
This could be out of range slot number, missing slot number where one is
required, or bad command.
Cannot, not yours
This message occurs when a remote user attempts to kill a message which is not
his, or he tries to read personal message by or for someone else.
?Mailbox full
This message occurs when either all of the available slots are full, or the actual
message space is full. Messages must be killed to recover from this error.
Not found
This message occurs when one attempts to read or kill a non- existent message
from an empty slot.
To Next Page
Loading...
