MGE UPS Systems EPS 6000 - Page 6

section description page number
2.4 . . . . . . . . . . . . . . . Normal Operating Procedures 2 — 29
2.4.1 Checks Before Start-up 2 — 29
2.4.2 Start-up 2 — 30
2.4.3 Checks After Start-up 2 — 31
2.4.4 Shut-down 2 — 32
2.4.4.1 Emergency Shutdown
Using EPO 2 — 32
2.4.4.2 Normal Shutdown 2 — 33
2.4.5 Isolation for Maintenance 2 — 33
2.4.5.1 Isolation of an
Individual UPS Module 2 — 33
2.4.5.2 Isolation of
Static Switch Cabinet (SSC) 2 — 35
2.4.5.2.1 Without Maintenance Bypass 2 — 35
2.4.5.2.2 With Maintenance Bypass 2 — 35
2.4.6 Forced Transfers 2 — 36
2.4.6.1 Uninterrupted
Transfer Conditions 2 — 36
2.4.6.2 Forced Transfer From
Bypass AC Input Source
to Inverter 2 — 37
2.4.6.3 Forced UPS Module Shut Down 2 — 37
2.5 . . . . . . . . . . . . . . . LCD Messages 2 — 37
Section III Maintenance and Service
3.0 . . . . . . . . . . . . . . . Scope 3 — 1
3.1 . . . . . . . . . . . . . . . Safety Instructions 3 — 1
3.2 . . . . . . . . . . . . . . . Preventive Maintenance 3 — 1
3.3 . . . . . . . . . . . . . . . Replacement Parts 3 — 2
3.4 . . . . . . . . . . . . . . . Troubleshooting and
MGE Servicing 3 — 3
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . g — 1
iv Contents
EPS 6000 UPS Shared Systems