What to do if MGE UPS Systems PULSAR 1000 shows 'OVERLOAD ALARM REDUCE LOAD'?
If the MGE UPS Systems unit displays 'OVERLOAD ALARM REDUCE LOAD', it means the load exceeds the programmed level or the UPS capacity. To resolve this, check the power drawn by connected devices, disconnect non-priority devices, and verify the programmed overload level.
What to do if MGE UPS Systems PULSAR 1000 UPS indicates 'LOAD UNPROTECTED OUTPUT OVERLOAD'?
If your MGE UPS Systems UPS displays 'LOAD UNPROTECTED OUTPUT OVERLOAD', it signifies the UPS is overloaded, and connected devices are being directly powered by the electrical network via the By-pass. To fix this, check the power consumption of the connected devices and disconnect any non-essential equipment.
General| Brand | MGE UPS Systems |
|---|---|
| Model | PULSAR 1000 |
| Category | UPS |
| Language | English |
To Next Page
