Need help?Do you have a question about the MGL Avionics V10 and is the answer not in the manual?
General| Brand | MGL Avionics |
|---|---|
| Model | V10 |
| Category | Transceiver |
| Language | English |
Explains the Flip-Flop frequency selection operation.
Interprets the information shown in the status bar.
Monitors and displays supply voltage and internal temperature.
Function of the Menu button to access system functions.
Function of the Active button for frequency switching and scanning.
Function of the VOL/SQL button for volume and squelch.
Information on storing and managing frequencies.
Procedure for selecting stored channels.
Overview of the two-level menu for configurations.
Configuring noise suppression systems (VOGAD, VOX).
Adjusting display contrast for readability.
Applying a filter to reduce unwanted audio frequencies.
Connecting and managing external audio inputs.
Configuring automatic scanning upon transceiver startup.
Accessing the secondary menu for initial setups.
Setting the operating mode for single or dual transceivers.
Inverting microphone phase to mitigate RF feedback.
Preventing transmission when receiving signals.
Enabling priority scan for improved reception.
Selecting the frequency selection mode (direct or flip-flop).
Enabling independent microphone level adjustments.
Option to reset all settings to factory defaults.
Critical guidelines for safe and compliant installation.
Connecting two transceivers for dual watch or redundancy.
Alternative installation methods using audio panels.
Connecting the MGL Avionics NAV receiver to the system.
Integrating external intercoms and disabling internal ones.
Troubleshooting and resolving RF feedback issues.
Document version information.
Overview of communication via RS232.
Simple one-byte commands for remote operation.
Structure of periodic transceiver status messages.
To Next Page
