Installation and start-up LDM 210 - LDM 220
3. Installation and start-up
Keep the reader away from sources of electromagnetic fields (video
terminals, power supplies, PC, rotary machines, etc.)
Keep readers away from each other to prevent them from interfering with
one another (in case this is not possible, adjust the range of the readers
accordingly)
Keep readers at least 5 cm (2”) from metallic surfaces.
The installation and start-up of the reader consists in sequence:
Install the software on the PC.
Connect power to the reader (LDM 210 only).
Connect the reader to the PC.
Note :
The LDM 210 can be equipped with an optional 2 alkaline AAA1.5 V batteries for operation without an
external power supply.
The LDM 220 is delivered for desk using (horizontally). It can be used in vertical fixing; a specific label is
delivered for this use.
128569B 11
Publication, traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites, sauf autorisation écrite de nos services.
The publication, translation or reproduction, either partly or wholly, of this document is not allowed without our written consent. Format 112175C
To Next Page
Loading...
Need help?
General
