LDM 210 - LDM 220 Technical Characteristics
8.4 Electrical Characteristics of the LDM 220
Powered by the USB port: 4.15 V to 5.25 V.
Conforms to CE requirements
8.5 LDM 210 Serial Link
J6 female DB9 .
Pin number J6 Designation
1 Not used
2 TX
3 RX
4 Connected to pin 6 by the PCB
5 GND
6 Connected to pin 4 by the PCB
7 Connected to pin 8 by the PCB
8 Connected to pin 7 by the PCB
9 Not used
8.6 LDM 220 USB link
J1 male 5 pins connector
Pin number J1 Designation
1 Vbus (Red)
2 D- (white)
3 D+ (green)
4 GND (black)
Shell Shield
8.7 Environmental Conditions LDM 210 and LDM 220
Operating Temperature: 0 to +50°C
Storage Temperature -10°C to +60°C
Relative humidity: 90%
(without condensation)
38 128569B
Publication, traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites, sauf autorisation écrite de nos services.
The publication, translation or reproduction, either partly or wholly, of this document is not allowed without our written consent. Format 112175C
To Next Page
Loading...
Need help?
General
