Operation LDM 210 - LDM 220
4. Operation
Keep the reader away from sources of electromagnetic fields (video
terminals, power supplies, PC, rotary machines, etc.)
Keep readers away from each other to prevent them from interfering with
one another (in case this is not possible, adjust the range of the readers
accordingly)
Keep readers at least 5 cm (2”) from metallic surfaces.
The reader has no stand-alone function; it must be used connected to a PC using
software provided by MGP Instruments.
Three bicolor LED’s inform users about the status of exchange sequences with the
dosimeter.
1 – Verify Go/Stop and Hands Free Operation (POWER)
2 – Status Management (READY/BUSY)
3 - Indication of passage (ACCESS/NO ACCESS)
3
2
1
3
2
1
Figure 13 :
View of the reader LDM 210 – LDM 220
128569B 21
Publication, traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites, sauf autorisation écrite de nos services.
The publication, translation or reproduction, either partly or wholly, of this document is not allowed without our written consent. Format 112175C
To Next Page
Loading...
Need help?
General
