MGP Instruments DOSISYS LDM 210 User Manual

Corrective Maintenance LDM 210 - LDM 220
6.2.2 TESTS Mode
The operating mode of the reader is chosen at start-up.
The test modes are usable if the reader is not in the remote downloading mode.
Note :
The mode can be used with the "HyperTerminal" communication tool from Windows.
6.2.2.1 « Various Tests »
The «various tests» mode is obtained when jumper SS2 is installed and SS3 is not
installed.
SS2
J16
6.2.2.2 Test « AGC programmable amplifier »
The « AGC programmable amplifier » test mode is obtained when jumper SS2 is not
installed and SS3 is installed.
SS3
J16
6.2.2.3 « autonomous » Test
The « autonomous » test mode is obtained when jumper SS2 and SS3 are installed.
SS2
SS3
J16
128569B 31
Publication, traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites, sauf autorisation écrite de nos services.
The publication, translation or reproduction, either partly or wholly, of this document is not allowed without our written consent. Format 112175C

MGP Instruments DOSISYS LDM 210 Specifications

General

Brand	MGP Instruments
Model	DOSISYS LDM 210
Category	Measuring Instruments
Language	English